产品展示

Product Center

顺义Modified Chlorinated Polyethylene(CPE)

顺义Modified Chlorinated Polyethylene(CPE)

As an excellent impact modifier, SUNCOAT CPE is widely used in PVC extrusion and injection molding products, including window profile, plates, pipes, etc. It can greatly improve the impact resistance of rigid PVC and processing fluidity.
  • Introduction
  • Application
  • Selection Guide

“SYPREN" is a registered trademark of CPE manufactured by Sunsure New Materials.

As an excellent impact modifier, SYPREN CPE is widely used in PVC extrusion and injection molding products, including window profile, plates, pipes, etc. It can greatly improve the impact resistance of rigid PVC and processing fluidity. In addition, it is used in a variety of formulation systems because of its good chemical resistance, excellent low temperature performance, high filling capacity, great weather resistance and compatibility.

CPE is one of the most important impact modifiers in the plastics market today. Compared with other impact modifiers such as AIM, MBS and ABS, CPE is preferred by more and more users due to its excellent comprehensive performance and very competitive price gaining a growing share in the impact modifier market.

CPE is most suitable for replacing acrylic impact modifier (AIM) or mixing with AIM to achieve the best cost performance at a given percentage without adjusting the processing data and formula.


 Performance:

✔ Excellent flexibility and low temperature impact resistance

✔Great compatibility with high polymers such as PVC, PE and ABS

✔Outstanding weather resistance

✔ Good processing properties

✔Fantastic corner strength 

✔Wonderful surface smoothness

✔ Excellent filling performance

✔Good cost performance 


 1.   Impact modifier for PVC rigid and semi-soft products: It can greatly improve the impact strength of products, and significantly improve their low temperature resistance, weather resistance and welding strength, etc.


 2.   Application in flame retardant ABS: Adding a certain proportion of our 135C to the formula of flame retardant ABS can not only prevent the loss of physical properties caused by adding a large amount of inorganic flame retardant in the formula, but also has a positive effect on improving the flame retardancy performance of the entire system (such as televisions, computers, etc.).


 3.  Applied to PVC soft products


Item

135A

CPE 6000

CPE 7000

135C3511

140C4211

Appearance

White powder

White powder

White powder

White powder

White powder

Chlorine   content, %

35

35

35

35

40

Heat   of fusion, J/g

0.8

0.6

1.0

15

1.0

Volatiles,   %

0.2

0.2

0.2

0.2

1.2

Sieve   remainder, 0.8 mm sieve, %

0

0

0

0

0

Bulk   density, g/cm3

0.53

0.53

/

0.52

0.52

Impurity   particles, piece/100g

8

6

8

8

8

Thermal stability time, min @ 165ºC

10

12

10

10

9

Hardness,   Shore A

56

55

54

63

59

Tensile   strength, Mpa

11.5

12.0

12

9.0

9.0


Previous:None

Recently Viewed:

news.related_news

contact

Market Phone:+86-536-8155068

Email hosting service: info@sunsurecn.com

Factory address: Weisi Road, Alar City, Xinjiang

Office address: No. 3999, Taixiang Street, Weifang Economic Development Zone


Shandong Sunsure New Materials Co.,ltd. number:鲁ICP备2023019336号 Article | Region | Site map | RSS | XML Disclaimers